Net Rods and Wire

Below is a selection of three different accessories which fit net curtains to your window. Net Wire is the cheapest option and is available in several different widths, you simply cut the wire to your selected width using pliers (recommend you cut slightly narrower than the window because there is normally 5 percent stretch in the wire) and then twist the metal eyelets into the net wire. You then need to screw the metal hooks into the window frame and then clip the wire over the hooks, although this is the cheapest option it is a lot more time consuming and when the curtains are hanging sometimes the wire can drape down slightly between the hooks. Standard Hanging net rods are much easier to fit and you use some self adhesive hooks to attach to your window frames. The easiest but most expensive option is the spring loaded tension rods, this have a spring in the centre of the rod and are telescopic, you twist the rod about 1 inch wider than the window recess and then the rod will stay there with no fittings. This is very quick and you can fit your net curtains in under 1 min, also the curtains hang well as the tension rod is straight all the way across the window. These spring loaded net rods are available in 5 different sizes depending on what your window width is. If you have any questions about any of our net curtains accessories do not hesitate to contact us.

Sort by

Displaying 1 - 3 of 3